This article was updated in November 17, 2026 with new products and information by Mark S. Taylor
Two bottles of engine oil can look almost identical and still have different specifications. One may say 0W-20, another 5W-30. One may carry an API Starburst, while another has an API Shield or only the circular API Donut.
Those marks answer different questions. The SAE grade identifies viscosity. The API category describes an engine-oil performance level. The ILSAC mark identifies an additional performance standard. A vehicle manufacturer may also require a separate approval code.

Quick answer: How to read an engine oil label, check four things: the SAE viscosity grade, API service category, ILSAC certification mark when required, and any manufacturer-specific approval. Match each requirement to your owner’s manual. A newer API category or a full-synthetic label does not authorize a different viscosity or an unapproved oil.

Contents
- 1 1. What Do the Numbers on Engine Oil Mean?
- 2 2. What Is the API Donut on an Oil Bottle?
- 3 3. What Is the API Starburst?
- 4 4. What Is the API Shield?
- 5 5. API SQ vs. ILSAC GF-7A: Are They the Same?
- 6 6. What Happened to GF-6A and GF-6B After October 1, 2026?
- 7 7. What Is an OEM Oil Approval?
- 8 8. Does Full Synthetic Mean the Oil Is Right for My Car?
- 9 9. How to Choose the Right Oil From the Shelf
- 10 FAQs About How to Read an Engine Oil Label
- 11 The Bottom Line
1. What Do the Numbers on Engine Oil Mean?
The letters and numbers in a label such as 0W-20 or 5W-30 identify the oil’s SAE viscosity grade.
Viscosity describes an oil’s resistance to flow. Engine oil must meet low-temperature requirements during cold starts and maintain the required viscosity characteristics at operating temperature.
A multigrade oil has two numbers:
- The first number, followed by W, identifies the oil’s winter viscosity classification. The W stands for winter.
- The second number identifies its high-temperature viscosity grade.
For example, 0W-20 and 5W-30 are different viscosity grades. They are not interchangeable simply because both are common passenger-car oils.
AAA explains that the vehicle manufacturer’s manual specifies the SAE grade the engine needs. Use that grade unless the manufacturer lists an approved alternative for the exact engine and operating conditions.
0W-20 vs. 5W-30: What’s the difference?
| Label | What it tells you |
|---|---|
| 0W-20 | Meets the SAE 0W winter classification and SAE 20 high-temperature grade |
| 5W-30 | Meets the SAE 5W winter classification and SAE 30 high-temperature grade |
| 0W-16 | A lower-viscosity grade used only in applications approved by the manufacturer |
The lower winter number indicates that the oil meets a more demanding low-temperature viscosity classification. The second number identifies a different high-temperature viscosity grade.
Do not assume thicker oil is automatically better for an older engine. A different viscosity can affect oil flow, pressure, variable valve timing, fuel economy, and other systems.
The correct choice depends on the engine design and manufacturer instructions. If the manual lists more than one permitted grade, follow its temperature and operating-condition guidance.
2. What Is the API Donut on an Oil Bottle?
The API Donut is the circular service symbol printed on many engine-oil containers. It shows the oil’s API service category and SAE viscosity grade.
It can also display a Resource Conserving designation in its lower section.
| Part of the API Donut | What it tells you |
|---|---|
| Top section | API service category, such as SQ or SP |
| Center | SAE viscosity grade, such as 0W-20 |
| Bottom section | Resource Conserving, when the oil qualifies |
What do API S and C categories mean?
For gasoline-powered passenger cars and light trucks, API service categories use the letter S, which stands for Service.
Diesel engine oils use API C categories, which stand for Commercial. Some oils meet more than one service category and may display both.
Do not assume a diesel-only C category automatically meets a gasoline engine’s requirements. Check the owner’s manual and the complete oil label.
API explains the Donut and its different sections in its Motor Oil Guide.

3. What Is the API Starburst?
The API Starburst is a certification mark for qualifying passenger-car gasoline engine oils that meet the applicable ILSAC standard.
API’s Motor Oil Guide identifies the Starburst with ILSAC GF-7A. The mark cannot be applied to SAE 0W-16 oils.
If your owner’s manual specifies an ILSAC GF-7A oil, look for the Starburst and confirm that the viscosity grade also matches the manual.
The Starburst does not replace the SAE grade check. A bottle can carry a current certification mark and still be the wrong viscosity for a particular engine.
4. What Is the API Shield?
The API Shield identifies oil meeting ILSAC GF-7B.
The Shield applies only to SAE 0W-16 oil. It is intended for engines whose manufacturers specify that viscosity and performance category.
Do not choose a Shield-marked oil just because the mark looks newer or more advanced. If the manual calls for 0W-20, 5W-30, or another grade, the Shield does not authorize a switch to 0W-16.
Starburst vs. Shield: What’s the difference?
| Certification mark | ILSAC category | Viscosity limitation |
|---|---|---|
| API Starburst | GF-7A | Cannot be applied to SAE 0W-16 |
| API Shield | GF-7B | Applies only to SAE 0W-16 |
Both marks identify ILSAC performance standards for qualifying gasoline engine oils. The correct mark depends on the required category and viscosity for the engine.
5. API SQ vs. ILSAC GF-7A: Are They the Same?
They are related, but the wording on the label matters.
API’s Motor Oil Guide states that API SQ with Resource Conserving matches ILSAC GF-7A. The Resource Conserving designation identifies the additional fuel-economy and related ILSAC performance requirements included in that match.
That does not mean every bottle marked API SQ automatically carries the GF-7A classification.
Read the complete API symbol:
| Label wording | How to interpret it |
|---|---|
| API SQ with Resource Conserving | Matches the GF-7A route described in API’s Motor Oil Guide |
| API SQ without Resource Conserving | Do not automatically describe it as GF-7A |
| ILSAC GF-7A with Starburst | Identifies the GF-7A certification mark |
| ILSAC GF-7B with Shield | Identifies GF-7B for SAE 0W-16 only |
This distinction matters when the owner’s manual names an ILSAC category rather than only an API service category.
API SQ is also a newer gasoline engine-oil service category than API SP. API’s guide describes additional protection requirements for SQ. However, the newer category does not authorize a different viscosity or override a separate manufacturer approval.

6. What Happened to GF-6A and GF-6B After October 1, 2026?
API’s Motor Oil Guide identifies GF-7A and GF-7B as the current ILSAC categories introduced in March 2025.
The guide also states:
- Use GF-7A where GF-6A is recommended.
- Use GF-7B where GF-6B is recommended.
- GF-7B applies only to SAE 0W-16.
- GF-6A and GF-6B became obsolete on October 1, 2026, according to the guide’s footnote.
The two newer categories have different applications:
| Category | API certification mark | Application |
|---|---|---|
| GF-7A | Starburst | Qualifying passenger-car gasoline engine oils |
| GF-7B | Shield | SAE 0W-16 oils only |
| GF-6A | Previous category | Replaced by GF-7A where GF-6A is recommended |
| GF-6B | Previous category | Replaced by GF-7B where GF-6B is recommended |
Does an older GF-6 bottle become unsafe on October 1, 2026?
The category’s obsolescence date is not a blanket chemical expiration date for every sealed bottle already manufactured.
The API guide identifies a change in ILSAC category status. It does not state that every bottle carrying an older mark becomes chemically unsafe on that date.
If you find an older bottle, check its package condition, product date information, storage history if known, and the exact requirements for your engine. When in doubt, choose a currently licensed product that matches the owner’s manual.
An important API source discrepancy
API’s Motor Oil Guide PDF includes a footnote stating that GF-6A and GF-6B become obsolete on October 1, 2026. However, the separate API Oil Categories HTML page still displays GF-6A and GF-6B as current.
These two API resources do not agree on the status shown. For this article’s transition explanation, the more detailed Motor Oil Guide PDF is used, with the discrepancy disclosed here.
Check API’s latest publications before relying on older online charts or archived oil-label information.
Sources:

7. What Is an OEM Oil Approval?
Some vehicle manufacturers require more than an SAE grade and an API or ILSAC category.
They may specify a manufacturer approval or performance standard. The code can appear in the owner’s manual, maintenance documentation, or technical service information.
If the manual lists a required approval, match the exact code. Do not assume an oil is acceptable because its label says it is suitable for a particular brand or because it has the correct viscosity.
The distinctions are important:
- SAE grade identifies the viscosity classification.
- API category identifies an industry engine-oil performance category.
- ILSAC mark identifies an applicable passenger-car gasoline oil standard.
- OEM approval identifies a manufacturer’s additional requirement for a specific application.
For example, General Motors uses dexos oil specifications for certain applications. The exact requirement depends on the vehicle and engine.
AAA’s motor oil guide also explains why drivers should check the manufacturer’s specifications rather than choosing oil by viscosity alone.
Is an oil that says “recommended for” the same as an approved oil?
Not necessarily.
Read the exact wording on the container and the product’s technical data sheet. Some manufacturers distinguish between an oil that has an official approval and one that the oil company recommends for an application.
If the owner’s manual requires a specific approval, confirm that the exact product meets that requirement. If the label is unclear, ask the oil manufacturer for written confirmation.
Do not invent or assume an OEM approval based on a product’s brand name.
8. Does Full Synthetic Mean the Oil Is Right for My Car?
No.
“Full synthetic,” “synthetic blend,” “high mileage,” and “extended performance” describe the oil’s formulation or marketing position. They do not replace the required viscosity grade, API category, ILSAC mark, or OEM approval.
A premium oil can still be the wrong choice for your engine if it does not meet the manufacturer’s specifications.
Check the back label and the manufacturer’s technical data sheet. If a required approval is unclear, ask the oil manufacturer or a qualified service provider to confirm the exact product and grade.
Keep these two decisions separate:
- Oil selection: Which viscosity and performance specifications does the engine require?
- Oil-change interval: How often does the manufacturer require the oil to be changed?
For service timing, see Synthetic Oil Change Interval: How Often Should You Change It?.
If an oil-pressure warning light is on, use the separate Engine Oil Pressure Symptoms: Warning Signs, Causes, and What to Do guide. Choosing the correct oil label does not diagnose an oil-pressure problem.

9. How to Choose the Right Oil From the Shelf
Before buying, use this checklist:
- Confirm the vehicle’s model year, engine, and market.
- Find the required SAE viscosity grade in the owner’s manual.
- Check the API service category.
- Check the ILSAC Starburst or Shield if the manual requires it.
- Confirm any named manufacturer approval code.
- Do not assume API SQ alone means GF-7A; check for Resource Conserving.
- Do not use GF-7B or SAE 0W-16 unless the manufacturer specifies it.
- Check the exact brand and product in API’s EOLCS Licensee Directory if API licensing is important to the purchase.
- Keep the oil-change interval separate from the oil-selection decision.
How can you check whether an oil is API licensed?
API operates the Engine Oil Licensing and Certification System (EOLCS). The program authorizes engine-oil marketers that meet its requirements to use API Engine Oil Quality Marks.
The API EOLCS Licensee Directory lets consumers search active licensees and their licensed products.
Search for the exact brand and product rather than relying only on an online product photo. API also runs a monitoring and enforcement program that includes testing oils sold in the marketplace.
FAQs About How to Read an Engine Oil Label
Is API SQ better than API SP?
API SQ is a newer gasoline engine-oil service category than API SP. API’s guide describes additional protection requirements. However, the correct choice still depends on the vehicle’s viscosity and manufacturer requirements. Do not change the grade just because a bottle displays a newer category.
Is API SQ the same as ILSAC GF-7A?
API’s Motor Oil Guide says API SQ with Resource Conserving matches ILSAC GF-7A. An API SQ label without Resource Conserving should not automatically be treated as a GF-7A claim. Read the complete API symbol and any ILSAC certification mark.
What is the difference between GF-7A and GF-7B?
GF-7A is identified by the API Starburst. GF-7B is identified by the API Shield and applies only to SAE 0W-16 oils. They are not interchangeable simply because both belong to the GF-7 family. Follow the category and viscosity specified by the manufacturer.
Can I use 5W-30 instead of 0W-20?
Only if the vehicle manufacturer approves that viscosity for the exact engine and operating conditions. The two grades have different viscosity classifications. A newer API category or synthetic formulation does not automatically make a different SAE grade acceptable.
Does full synthetic oil meet every API or OEM requirement?
No. Synthetic describes the formulation, not the complete approval status. Check the viscosity, API category, ILSAC mark when required, and any manufacturer-specific approval named in the owner’s manual.
The Bottom Line
Read an engine-oil bottle in the right order. Match the SAE viscosity grade first, then the API category, the ILSAC mark if required, and any exact OEM approval.
The Starburst and Shield identify different ILSAC categories. API SQ with Resource Conserving matches GF-7A, while GF-7B is for 0W-16 only.
The newest label is not automatically right for every engine. Use the owner’s manual as the final authority, then compare the bottle against it.